Characteristics of 10GBASE-T Technology

The rapid development of telecom technology is driving the increasing need for higher bandwidth in data center. In recent years, 10GBASE-T technology, which uses twisted-pair copper cabling and RJ45 interfaces, has been utilized by many data center managers. When it comes to 10GBASE-T, we firstly think of Ethernet network cable, such as Cat6 UTP cable and Cat6a cable which support 10G speed over 55 meters and 100 meters respectively. They are cheap and easy to run in data center. And this is just one of the most prominent characteristics of 10GBASE-T technology. This article is going to give a detailed introduction to characteristics of 10GBASE-T.

Background of 10GBASE-T

In data center, fiber optics also generally gain popularity because of their high speed and low latency. Many data center managers choose to use a combination of Direct Attach Copper (DAC) cables for short distances (up to 7 meters for Top-of-Rack connections) and fiber optic cabling for longer distances (for End-of-Row connections) to fulfill the migration to 10GbE networks. However, the costs associated with a Top-of-Rack switch and expensive cabling and optics limited the widespread adoption, especially in data centers where 1GbE is already broadly deployed. On the contrary, 10GBASE-T is backward compatible with 1000BASE-T, and it can be deployed in existing infrastructures that are cabled with Cat6 and Cat6a or greater cabling, helping data center managers to keep costs down while offering an easy migration path to 10GbE. Therefore, 10GBASE-T technology is extensively used. From the chart below, we can clearly see the growing trend of 10GBASE-T.

10G fiber optics vs. 10GBASE-T technology

Characteristics of 10GBASE-T

Reach: DAC cables support 10Gbps over very short distances, while 10GBASE-T technology can reach much longer reach with Cat6a cable, up to 100 meters. This makes 10GBASE-T cabling with Cat6a the best universal solution for 10GbE requirements in today’s data centers.

Backward compatibility: 10GBASE-T is backward compatible with 1000BASE-T, so it can work with existing structured cabling system. Unlike SFP+ cabling, a 10GBASE-T connection can auto-negotiate and auto-select the proper port speed when plugged into a GbE port. This gives data center managers much flexibility in cabling system.

Installation: Fiber optic cable is easily damaged, while Cat6 cable and Cat6a cable are easy to manage. Even if you want to DIY your own cable length, you just need bulk Ethernet cable, crimping tools and RJ45 connectors. As RJ45 connectors are compatible with existing 1GbE infrastructure, the installation of Cat6 and Cat6a cable is easy.

Power: When 10GBASE-T standard was released at the beginning, 10GBASE-T PHYs consumed too much power which limited its widespread adoption. With process improvements, both the power and cost of the latest generation of 10GBASE-T PHYs have reduced.

Cost: Fiber optic cable is more expensive than Ethernet network cable, and usually fiber optic cable is used for long transmission distance application. While Cat6 cable and Cat6a cable are low cost, which can provide cost-effective and easy-to-use solution for 10GBASE-T short distance network deployment.

Conclusion

10GbE has been the mainstream of telecom data center right now. The low cost and easy installation of 10GBASE-T makes it widely applied. In addition, 10GBASE-T provides investment protection via backward compatibility with 1GbE networks. On the market, there are not only Cat6 cable and Cat6a cable for 10GBASE-T cabling, but also some other 10GBASE-T products, such as 10GBASE-T switch and 10GBASE-T adapter. These simplifies data center networking deployments by providing an easier path to 10GbE infrastructure. These characteristics of 10GBASE-T will help drive 10GBASE-T to a prominent place in the data center. FS.COM is a reliable manufacturer which provides high quality Cat6 cable and Cat6a cable at customized length. Also, there are 10GBAST-T RJ45 transceivers. For more details, please visit www.fs.com.