As the era of 40/100G network is coming, traditional LC cabling is no longer able to satisfy the demands for high data rate and high density in data center. The MPO/MTP cabling features replacing 12 or 24 LC connectors with one MPO/MTP connector, which is a high density, high performance solution for fast installation of enterprise data center and other high count cabling implementation.
With the advent and popularity of cloud computing and big data, the demands for high-speed transmission and data capacity are becoming much greater than ever before. And 40/100G Ethernet is now a trend and hotspot for data center cabling system. Since MPO/MTP connectors are the up-and-coming standard optical interface for 40/100G Ethernet network, it is predicted that MPO/MTP solutions will eventually flood the data center. After all, the high fiber count in one connector creates endless possibilities.
As the new favorite of data center, the MPO/MTP solutions feature the following advantages:
Since the MPO/MTP products are factory terminated, they can be installed easily and simply. They use a simple push-pull latching mechanism for easy and intuitive insertion and removal. Thus, the installing process only includes pull and plug, eliminating all unpredictable field termination troubles. It is estimated that the MPO/MTP solutions’ installation time can be reduced by up to 75% compared to traditional fiber cabling systems.
Being the same size as a SC connector, the MPO/MTP connector can accommodate 12/24 fibers, providing 12/24 times the density. Therefore, MPO/MTP connectors allow high-density connections between network equipment in telecommunication rooms, and offer savings in circuit card and rack space.
As mentioned above, the installation process of MPO/MTP products is simple and easy. Therefore, the installation time involving a costly highly qualified workforce can be reduced to a minimum.
As we all know, most MPO/MTP products are modular solutions. This is the good choice to ease future expansion and for quick and easy system reconfiguration.
FS.COM, as a fiber network solution supplier, is now going to be ahead of the game with various MPO/MTP solutions that are designed for the reliable and quick operations in the data center. We offer a wide range of MPO/MTP solutions including trunk cables, harness cables, cassettes, fiber enclosure and so on.
MPO/MTP trunk cables are made up of 12/24/48 fiber cables factory pre-terminated at both ends with MPO/MTP connectors. They are designed to be used as backbone or horizontal cable interconnections. These assemblies are available in OM3, OM4 and single-mode fiber. Standard lengths of 5, 10, 25 meters are available. Custom lengths are also available on request.
MPO/MTP harness cables are often made up of 12 fiber cables terminated at one end in MPO/MTP connectors, through a bifurcation unit, to SC or LC connectors terminated on simplex/duplex cables. They are used to connect equipment in racks to MPO/MTP terminated backbone cables. Available in OM3, OM4 or single-mode fiber in lengths of 5, 10, 25 meters, etc. they are designed for high density applications which require high performance and speedy installation without on-site termination.
MPO/MTP Cassettes are enclosed units that contain 12/24 fiber factory terminated breakout cables inside, serving to transition ribbon cables terminated with MPO/MTP connector to the more common LC or SC interface used on the transceiver terminal equipment. This kind of cassette provides a quick and efficient way to deploy up to 24 LC or 12 SC fiber ports in a single module.
As a scalable modular, the MPO/MTP fiber enclosure is designed for high density Gigabit Ethernet application. MPO/MTP fiber enclosures are used for terminating backbone cables at the main distribution area (MDA) and horizontal distribution area (HDA). They are available in 1U, 2 U and 4U (as shown in the following figure).
Note: The HD MPO/MTP cassettes and fiber enclosure are also available in FS.COM for high-density demands.
40/100G Ethernet is the developing trend in data center cabling system. Therefore, MPO/MTP cabling system becomes the ideal solution for the growing demands on high-capacity cabling data center. FS.COM provides a series of MPO/MTP solutions which are plug and play, simple installation, compact design and high precision. For more information, please contact us over email@example.com.