Special Instructions of Cisco SFP Transceivers

The Cisco SFP transceivers are designed to change the serial electric signals to the serial optical signals which mainly maintain gigabit Ethernet, includes fiber channel and SONET/SDH, it provides a beneficial way, adopt the method of resolution in the university campus, data center, metropolitan areas, ring networks and store web site.

Ethernet converter net from one end to another in order to let more systems with different thread accurately corresponding associated Ethernet cable. This is likewise being used within the similar set up once there are several computers functioning with varying types of technology. In addition, optical fiber cable can defy from any type of electronic equipment, mobile phones and wireless complex which usually don’t like with the traditional Ethernet, such equipment which was exposed loses the signal interference. In this case, as converted into optical fiber Ethernet, because it provides a quick and excellent signal. The SFP is by the maritime safety administration or from IBM, lucent, Siemens, ample/TYCO and Infineon Multi-source is unqualified, this is the main content of the network vendor management. The SFP transceivers have the following advantages:

1. For reasons of that you can insert, optical fiber interface, still can modify on the end pace of the creation of the card.

2. It is able to accommodate a lot of connector interface or a combination of LX SFP and SX.

3. Since the basket of SFP transceiver is placed in the PCB in order to accept stated, it can reduce the additional program, thereby reducing the costs. As a result, it made it easier to reconfigure and replacement.

4. Because of optical element, SFP transceivers enhanced reliability. It allows the use of higher the temperature.

Cisco SFP is interchangeable, in addition to its flexibility, from a wide range of Cisco project. It can be used with Cisco 1000BASE-TX, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U in a port through the port joint.

Cisco SFP modules need to connect the one-piece structure to another, because it plays an important role in the most commonly used information technology business.

The SFP transceiver modules are generally hot-pluggable I/O devices that can easily get plugged into the module sockets. The transceiver efficiently connects the electrical circuitry of the module to the copper or optical network. Users can utilize any combination of SFP transceiver modules that the Cisco transceiver device assists. The only thing to take note here is that every port should match the wavelength requirements on the other end of the cable and that the cable should not exceed the concerned cable length in order to ensure consistent communication. It is recommended that users utilize the SFP transceiver Cisco modules only on the Cisco instrument. Every single Cisco SFP transceiver module assists the Cisco quality identification that enables a Cisco router or switch to identify and authenticate that the transceiver module is examined and approved by Cisco. Now I introduce SFP-10G-ZR compatible with Cisco devices in Fiberstore. it is cheaper than Cisco company. The SFP-10G55-80-CO series single mode transceiver is small form factor pluggable module for duplex optical data communications of 10G. This transceiver offers the same function with Cisco SFP-10G-ZR and it is fully compatible with Cisco devices. It is with the SFP+ 20-pin connector to allow hot plug capability.This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm.


Fiberstore was founded in 2001, our focus is to provide high quality fiber interface, SFP compatible modules, GBIC LAN and WAN networks and related products. Fiberstore believes that the road to success is through excellence and customer service. And now Fiberstore in order to feedback customer of their comings, it is making with 30% discount of the price, it you want know more information about these fiber optical transceivers welcome to visit our Fiberstore.