Some Special Tools for Fiber Optics From Fiberstore

As we know, splicers will need much the same tools to open and set up a fiber splice as they want a copper splice. The usual cable knife, tabbing shears, etc, are required, along with a few specially tools used only for fiber splicing.

Once the sheath has been opened and the field bonded in the standard fashion, a buffer tube cutter is required to score the hard, gel-filled buffer tubes. Caution should be exercised when performing this operation, because the buffer tubes contain fibers that are protected only by their primary coating. Use this tool only to score the tube and not to cut it. After opening up an express run (straight through cable), the splicer will have to use a tube splitter tool to remove the buffer tube bu running it along the tube, which then splits. Other handy tools include ceramic scissors for cutting the Kevlar in many cables, a magnifier for close-up examination of the fiber end face, and masking tapes for scarp containment. Alcohol with lint-free pads and a Fiber Optic Stripper are also requirement.

Fiber Optic Stripper

Most critical of all, however, is the choice of splitter. With the exception of the AMP Optimal splice/workstation (the splitter is built in), every fiber optic splice requires the use of a separate splitter. This tool, carrying in price 150 dollars to 2,500 dollars, can make or break a splicer’s day. The Fiber splitter on the end of a fiber is the most critical part of a successful splice, so it is advised to purchase and use a high-quality splitter. In my experience, at least half of all failed fiber splices are a direct result of a bad cleave from a cheap splitter. This is not the place to save money.

Unlike testing copper cable, testing fiber cable is easy and fun, Only two tests are specified by the EIA/TIA and most firms don’t even require those. The four basic tests that can be performed on fiber are the continuity test, received power test, single-ended test, and double-ended test, the continuity test can be performed quickly and easily with as little equipment as a 10 dollars flashlight, while the received power test requires the use of a power meter, which can be purchased for as little as 500 dollars. The other two EIA/TIA test procedures require the use of a light source, power meter, and several good jumper cords. Kits containing this equipment are available for as little as 1,000 dollars.

The optical time domain reflectometer (OTDR) is an expensive instrument used primarily for acceptance testing and fault locating on long-haul single-mode fiber systems. This is called the “blind spot” or “dead zone.” However, once outside the dead zone, the OTDR is used primarily for reading insertion loss and back reflection at splice points. This instrument is not designed to give accurate end-to-end loss measurements on a fiber system. Use the standard for this test. OTDRs may be purchased for one or two wavelengths and may be single mode, multimode, or contain launch modules for both modes of operation. Prices vary from slightly less than 10000 dollars to as much as 45,000 dollars, depending on features desired.

Fiber optic cables are becoming the predominant medium of the ’90s and on into the 21st century. The necessary equipment, tools, and materials are more sophisticated than those used for copper splicing and trouble-shooting, but they are coming down in price as competition increase in this field. The wide bandwidth of fiber transmission will continue to drive improvements in fiber optics as voice, video, and data find their way into homes.

Fiberstore, as you know, it provides all kinds of fiber optical products include what you need, and it can supply custom service, we can according to your needs to make up it, I think it is the feature that many store can not do like this. Except this, the price is also exciting, almost products are doing 30% discount on the price, I really recommend you to have a try, it must bring you big surprise…

Overview of Miller Fiber Optic Stripper

Miller is a diversified global company specialized in high-tech products in development. It’s diverse business involves in welding, cable & wire tools, winery, furniture and even textile. Miller Cable & wireless tools are very famous fiber optic tools that feature top technology and perfect performance.

FiberStore, as the major global fiber optic tools provider, is proud to become the agent for the original Miller fiber optic tools. Our Miller fiber optic tools include fiber scribers, cable Strippers, cutting tools and Kevlar shears.

A precise stripper is utilized to remove the buffer coating of the fiber itself for termination. There are three types of fiber strippers available, known as the Miller Stripper, No-Nik and Micro-Strip. These three can work equally well, and most techs choose the one they are most acquainted with. The Miller striper is used on the left thus has the disadvantage of being “right-handed”, Which is considered to be the most rugged. The No-Nik is careful with the fiber but requires careful cleaning. Check out the original Miller Fiber optic stripper features:

Miller Fiber Optic Stripper FO 103-D-250
New Dual holes models offer he same quality of our standard FO 103-S fiber tool coupled with a second hole
FO 103-D-250: Second hole for stripping 900 micron tight buffer down to 250 micron buffer coating and standard 125 micron fiber stripping (250 micron removal to 125 micron) – allows longer
Stripping lengths without damaging the fiber
Easy-to-read stripping diagrams imprinted on handles
Made in the U.S.A.
Length: 5.375 in (137mm)
Weight: 2.5 oz (71g)

Miller Fiber Optic Stripper FO 103-T-250-J
New three-hole model performs all common fiber stripping functions in one compact tool….
Hole for removal of 2 to 3 mm fiber jackets
Remove 900 tight buffer to 250 micron buffer coating
Standard 250 to 125 micron stripping
Same consistent quality and features found in our standard FO 103-S tool
Made in the U.S.A.
Length: 5.375 in (137mm)
Weight: 2.5 oz (71g)

Miller FO 103-S Fiber Optic Stripper
For stripping 250 micron buffer coating from 125 micron optical fiber
Precision diameter hole & V-opening in blade allow for accurate buffer coating removal
NEW pivot pin, spring and precision handles enhances tool functionality and durability
Factory set, requires no adjustment
Prevents scratching or nicking of optical fiber
All cutting surfaces are precision formed, hardened, tempered and ground assuring precise buffer removal
Made in the U.S.A.
Length: 5.375 in (136.53mm)
Weight: 2.5 oz (71g)

Miller Fiber Optic Stripper CFS-2
For stripping 250 micron buffer coating to expose 125 micron cladding fiber
Second hole for stripping 2-3mm fiber jackets
140 µm diameter hole and V-opening in blade allows removal of 250 micron buffer coating from 125 micron fiber
Pre-set at the factory – no adjustments needed
Will not scratch or nick glass fiber
All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips
Comfort-grip, ergonomic handles
Lock to hold tool closed when it is not in use
Length 6.43 in (165.00mm)
Weight 4.17 ounces (119.0g)

Most strippers are “sized” for the fiber coatings to be removed. So ensure you have the proper stripper for the fiber being stripped. Whichever stripper is used. Care must be taken to not nick the Fiber during the stripping process as it can cause cracks that may lead to fiber failure sometime in the future. Strippers require careful cleaning and immediate replacement if they become damaged or worn.

Strippers are sized for the fiber coatings to be removed. So ensure you have the proper stripper for the fibers to be stripped. Whichever stripper is used, you must take care to not nick the fiber during the stripping process as it can cause cracks that may lead to fiber failure sometime in the future. supplies various of high quality fiber optic tools individually or in kits, most of the price is extremely cheap, even the fiber optic tool kit price is with attractive discount rate.