Author: Admin

The Most Opted Solution For Fiber Optic Networks

Fiber patch cables could be the most opted solution nowadays for the networking and broadcasting industry, mainly in the fiber optic networks. They are strands of optically pure glass as thin as real hair, carrying information via mode of transmission of sunshine. Short patch leads those usually created using stranded wires are flexible patch cables, sometimes might be called patch cords (or patchcords). The fiber optic patchcord is used to plug one device into another.

The fiber patch cables have various uses in most kinds of industries. They are used in medical imaging, mechanical engineering, LAN applications, cable television networks, telephone lines, etc. They’ve revolutionized the entire network industry of telephones, cable, internet, audio applications, etc. The fiber patch cables offer accurate signal transfer that is totally distortion free. Thus because of these cables the audio or video transmission is totally distortion free and crystal clear. Because the fiber patch cables use light like a mode of transmission, there isn’t any hazard of electric interferences or any tampering.

Fiber patch cables are utilized to two nearby components using the fiber connectors on their ends. Different fiber patch cables include their respective connectors. They can be a perfect and easy replacing copper cables because a number of them make use of the same RJ45 connector as copper patch cables.

various parameters fiber patch cables can be found in simplex and duplex, multimode and single mode with ST-ST, ST-SC, SC-SC connectors. The 2 prominent types are single mode and multimode.

Single mode fiber patch cables are used in long-distance high capacity voice applications like telephone transmission or long distance gigabit networking. These fiber patch cables may use 9/125 micron bulk fiber cables and connectors at both ends.

Multimode fiber patch cables are used in computer industry which is standard for data applications like local area network, wide area network, etc. Fiber patch cables in multimode are available in 50 and 62.5 micron. SC, ST, LC, FC, MT-RJ, E2000 and MU connectors have polished ceramic ferrules for precision and durability. The SC and LC duplex fiber patch cables come equipped with a clip to keep polarity. LC to LC fiber patch cable gives unlimited bandwidth at high speeds over long distances. They are ideal for connections between fiber patch panels, hubs, switches, media converters and routers, etc.

FIBERSTORE fiber patch cables provide higher speeds and increased bandwidth, when compared with conventional twisted-pair copper cable. They are suitable for all standard fiber optic equipment and connectors. Ceramic connectors of those fiber patch cables ensure low signal loss and high reliability together with total immunity to electrical and electromagnetic interference. Except normal patch cables, MPO fiber and MPO trunk cable can also be found.

How To Classify Fiber Optic Pigtails

Fiber optic pigtail can be considered as fiber optics patch cords. It comprises a fiber patch connector as well as an optical fiber cable. A fiber patch cable can be divided into two pigtails. Typical applications of fiber pigtail would be to link the fiber optic cable with fiber optic equipment. The connector side is used to link the gear, while the other part is melted together with the other fiber optic cable. By melting together the fiber glasses, it can reach the absolute minimum insertion loss.

Fiber optic pigtail has a number of different interfaces as well as different coupler. Common kinds of fiber optic pigtails are often with 0.9mm fiber cable diameter, and usually installed inside ODF unit. Based on the transfer mode, the fiber connector and the end face type, it can be classified to various kinds.

1) According to the transfer mode, fiber optic pigtails can be divied into Single-mode (sheath color is generally yellow) and Multi-mode (jacket color is usually orange). Single-mode fiber pigtail includes single mode fiber optic cable and terminated with single mode fiber optic connectors at the ends. Multimode fiber pigtail consists of multimode fiber optic cable and terminated with multimode fiber optic connectors at the ends. Obviously, there will be other colors, but many are of both of these colors.

2) According to the fiber connector, there are SC, LC, FC, ST, MTRJ, MU and so on.
The SC pigtail is compliant to IEC, TIA/EIA, NTT and JIS specifications. It is with one piece construction and pulls proof design. SC is inexpensive but high performance, which makes it one of the most popular cables.
The LC pigtail features the RJ-45 style interface with low insertion loss and occasional back reflection; it’s with high precision alignment and is widely used all over the world. It is with zirconia ceramic ferrule. The same time frame, the LC pigtail switch could be connected directly, without a coupler, When pigtail Connect one end from the cable, if you want to protect ought to be used in terminal box, and also the terminal box the best selection out pigtails box directly.
The FC fiber optic pigtail is compliant to IEC, TIA/EIA, NTT and JIS specifications. The FC connector is by using PC, UPC, APC versions. Both single mode and multimode versions have a zirconia ceramic ferrule.
The ST fiber optic pigtail is with metal outer body and with a long spring loaded ferrule contain the optical fiber. ST Cable could be 9/125 single mode or 50/125 multimode or 62.5/125 multimode. ST fiber pigtails connector ferrule interface could be PC, UPC or APC.
The MU fiber optic pigtail is NTT and JIS compliant. It is with tunable zirconia connector ferrule and features the little size, optical and mechanism performance is comparable because the SC. This pigtail has zirconia ceramic ferrule.
The MTRJ pigtail cable end is made of a duplex precision molded MT feruled connector. The MTRJ is by using duplex plastic ferrule and compliant to TIA/EIA 568-A. MTRJ is really a plastic ferrule connector pigtail.

3) Based on the end face type, fiber optic pigtails can be divided into UPC and APC versions. Most commonly used types are SC/APC pigtail, FC/APC pigtail and MU/UPC pigtail.

As the key of fiber optic products manufacturer, FIBERSTORE supplies just about all types of fiber optic pigtail and MPO fiber, not only the most popular versions, but the waterproof fiber pigtails and armored fiber pigtails. They are produced strictly based on IEC standards, and have low insertion loss, high return loss, good interchangeability and repeat push-pull performance, which will make them easy to use.

MEMS Based Variable Optical Attenuators

It is commonly known that fiber optic attenuators are used in fiber optic communications, as fiber optic tester tools to test power level margins by temporarily adding a calibrated amount of signal loss, or installed permanently to properly match transmitter and receiver levels. According to its stability, it divided into fixed fiber optic attenuators and variable optical attenuators. Variable fiber optic attenuators generally use a variable neutral density filter, with advantages of being stable, wavelength insensitive, mode insensitive, it offers a large dynamic range.

With the rapid increases in traffic on optical telecommunications systems, there is an active program for developing transmission devices for use in wavelength division multiplexing (WDM), which is becoming mainstream technology for providing higher transmission speeds and a larger number of signal channels. It has been suggested that in the WDM systems of the future, variation in power due to the wavelength could be reduced a the quality of transmission improved by adjusting the power after demultiplexing into individual signals wavelengths. It is envisaged that the current method, in which the power of all the multiplexed optical signals is adjusted by a single variable optical attenuators (VOA) would give way to a method in which one VOA is used for each wavelength. Given the number of multiplexed wavelengths, this change will require VOAs that are considerably more compact. Against this background, There have developed a VOA using micro-electromechanical system (MEMS) technology with loss characteristics that have low wavelength dependence.

Single-mode fiber was used as the input and output of the VOA developed here, with a graded index fiber having the same diameter, 125um, as the SMF fusion spliced for a specified length, to form an optical coupling with a lens function. An anti-reflection coating is applied to the tip of the GIF (graded index fiber). GIF tip is polished at an angle so that the light beam emitted from the end of the GIF is not aligned with the optical axis of the fiber, but is at an angle to it. This angled optical beam is interrupted by means of a shutter that has been formed by inductively-coupled plasma deep reactive ion etching. The MEMS chip uses a silicon-on-insulator wafer, with the shutter, actuator and fiber grooves formed simultaneously on the chip by ICP-DRIE, followed by metal vapor deposition over the whole chip.

The actuator of the MEMS chip is of the comb type, and the GIF is held in the fiber grooves by means of adhesive. The MEMS chip with this GIF optical coupling system is fixed by adhesive within a casing, which is hermetically sealed.

MEMS variable optical attenuators are variable in three different configurations. The VA series works in transmission, whereas the VP series uses reflection to modulate the attenuation. The VX series is the VP or the VA series in mint plastic packing. In terms of performance, the VP series achieves lower insertion loss and better Polarization dependent loss characteristics. Whereas the VA series allows for an easier array integration and is the lower cost.

FiberStore offers a full line of optical attenuator variable testers, they are often combined with an active system component to maintain optical power on a network even if the power changes in the input signals. Our automatical variable optical attenuators are specifically designed for use in DWDM networks with individual channel source elements such as add/drop transmitters. The cost and performance characteristics of our automatically variable optical attenuators are specifically targeted to allow for the use of these devices in volume as principal DWDM channel stabilization components.

Media Converters Provide Cost-effective Soluton

Network complexity, demanding applications, and also the growing number of devices around the network are driving network speeds and bandwidth requirements higher and forcing longer distance requirements within the LANs. However, Media Converters provide solutions to these complaints, utilizing the optical fiber if it is needed, and integrating new equipment into existing cabling infrastructure.

What is the Media Converter? Media converter can be a device that functions like a transceiver, converting the electrical signal found in copper UTP network cabling into light waves used in fiber optic cabling. It gives you seamless integration of copper and fiber, and other fiber types in Enterprise LAN networks. Media converter supports numerous protocols, data rates and media types.

Fiber optic connectivity is important when the distance between two network devices exceeds the transmission distance of copper cabling. Copper-to-fiber conversion using media converters enables two network devices with copper ports to become connected over extended distances via fiber optic cabling. Media converters provide fiber-to-fiber conversion from multimode fiber to single-mode fiber or single-mode fiber to multimode fiber, and convert a dual fiber link to single fiber using Bi-directional (BIDI) data flow. They can also convert between wavelengths for WDM applications with devices such as WDM multiplexer. Media converters are typically protocol specific and are available to guide a wide variety of network types information rates.

For example, the Fiber-To-Fiber Media Converter can offer connectivity between multimode and single-mode fiber, between different power fiber sources and between dual fiber and single-fiber. It extends a multimode network across single-mode fiber with distances as much as 140km. Within this application, two Gigabit Ethernet switches equipped with multimode fiber ports are connected by using a couple of Gigabit Fiber-To-Fiber Media Converters, which convert the multimode fiber to single-mode and let the cross country connection between the switches. Furthermore, they support conversion from one wavelength to a new with all the single mode to multimode converter or multimode to singlemode media converter. These media converters are usually protocol independent and designed for Ethernet,and TDM applications.

Media converters do a lot more than convert copper-to-fiber and convert between different fiber types. Media converters for Ethernet networks can support integrated switch technology, and offer the opportunity to perform 10/100M and 10/100/1000M rate switching. Additionally, media converters can support advanced bridge features, including VLAN, QoS prioritization, Port Access Control and Bandwidth Control – that facilitate the deployment of recent data, voice and video to get rid of users. Media converters can offer all these sophisticated switch capabilities in a, cost-effective device.

Media converters save CAPEX by enabling interconnection between existing switches, servers, routers and hubs; preserving the investment in legacy equipment. They reduce CAPEX by avoiding the necessity to install new fiber links by enabling WDM technology through wavelength conversion. Media converters also reduce network OPEX by helping troubleshoot and remotely configure network equipment that is at distant locations, not waste time and funds when there is not just a network administrator on the distant location.

Media converters are necessary to produce a more reliable and cost-effective network nowadays. So, where are we able to get high quality Media Converters with reasonable price? Visit Fiber Media Converter Solution in FIBERSTORE now.

Fiber Optic Cables Installer Guidance

Nowadays, data transfer is among the most significant task to be accomplished by a data developer. There are numerous data transfer methods available in the market, but they are not reliable and safe. These reliability and security issues have caused lots of problems to those who need the data in its original form. However, you’ve fiber optic cables now.

Fiber optic cables are the most dependable and elegant approach to transfer data in the field. They set a standard, which may be hardly reached by other cables. It can possess a signal with highest efficiency, since the signal in a very fiber optic cable isn’t getting that much attenuated, at a least signal loss.

Furthermore, unlike copper wires, fiber optic cables don’t let intrusion of outdoor signals. In order to mix or access the signal carried from the fiber optics, one must intervene physically, which cannot go undetected without correct surveillance equipment. Therefore, fiber optic cabling is several folds securer compared to the regular copper cables. Also, since fiber optics isn’t made of copper wire or any other metallic wires, it’s much less denser, thus which makes it convenient to carry around and also needs fewer personnel for installing. Nevertheless, the cost of fiber optic cable might be a little higher than the regular cables, but studying the advantages and sum of money trapped in its maintenance and functioning accocunts for much more than the fee incurred.

With proper installation of fiber optic cables, the info could be delivered to more than a 1000 kilometers distance however, if the cables aren’t installed since they ought to be, then the data may well not even visit a person sitting beside the sender. For the effective usage of fiber optic cables, the installer should become aware of the policies information required.

Now the fundamental question that arises is the fact that the thing that makes the use of fiber optics installer effective? The answer is the data concerning the types of fiber optics and their installation this includes the techniques of protecting these cables in numerous environmental conditions. Fiber optic cables are designed to be able to minimizing the worries caused to the cable i.e., temporary or long-term stress and in addition to that, there should be fire safety compliance with in the cable. All these efforts assembled to style a fiber optic cable are effective only if the cable is installed properly by using the fiber optics installer guide.

There are lots of fiber optic cables which are manufactured as reported by the dependence on their usages which categorizes them into 2 types which can be maximum tensile strength and minimum bend radius. These optical cables which can be manufactured for special purposes as well as need special type of skills and their installation needs to be followed as per the manufacturers’ specifications for their proper and effective working. Moreover, from your manufacturing types, the fiber optic cables can be categorized into indoor fiber optic cables and outdoor fiber optic cables. These two differ from their manufacturing aspects and different features will also be added to them. The fiber optic cables useful for the great outdoors possess a rugged outer body and less flexibility in order to withstand the outdoor harsh temperature and environment whereas the indoor fiber optic cables have a flexible and fewer rugged cover. These two cables need different kinds of fiber optics installer guidance to put in.

Technology is incredibly dependent on its sources and fiber optic cables are among the most dependable sources. Nevertheless the users must remember the different types of cables, the manufacturing, cellular phone and structure which may be done using a fiber optics installer guide.

Fiber optics installer guidance is indeed important, where can users get the right suitable guidance for installation? Generally, fiber optics installer guidance could be a paper manual with all the fiber optic cable installation tools. However, installing different type of cable comes to a different guidance, such as installing Cat 7 cable is different from that of MPO to LC cable.