Fiber Optic Transceiver Archives - Page 9 of 10

Optimistic about the Development of 40G and 100G Network Devices in the Future

In June of 2010, the IEEE 802.3 ba 40G/100G standard issued. The Standard Approval timeline for IEEE 802.3ba is depicted in the figure. It makes me looking good forward to its development in the future. Traditional 10G port modules usually adopt LC connector, they are connected by dual cores while 40G Ethernet specification requires 8 cores connections, just 4 cores used for transmitting and another 4 cores used for receiving. Better advice for 40G Ethernet is that the 12 cores fiber cabling solution, each channel has 4 special transmitting fiber and 4 special receiving fiber, middle 4 fibers remain free. 100G Ethernet solution requires to make 24 fibers, it divided into two 12 fibers, one for receiving and another for transmitting, and each of the array, middle 10 fibers used for transit traffic, the two fibers on the ends are setting free.

Several years ago, once we met customers who wants to know if our transceiver modules support 40G and 100G ports, we will tell them that some suppliers who launched the 40G and 100G optical transceiver module are mostly based on previous 40G/100G draft, they are not the standard ports, and different vendors exist connection trouble, so we are all not sure. But nowadays, with the mature development of 40G and 100G cores, many supplier launched them their own fiber optic transceiver. In the field of 40G and 100G, device manufacturers adopt the advantage of long term evolution and 40G network which focus on 100G network communication equipment. In fact, it is the estimated results that operator who faces with 40G and 100G network. In the next year, 40G long distance transmission network market supplier will launch the 100G network transmission devices, it will bring a big challenge to the operator. The fact dedicates that fiber optic device operators will do double budgets for current production to meet the demand of the future developments.

In the network market, WDM devices are quite popular between global operators. It makes the sales of the products to improve highly. Adjustable and pluggable optical transceiver module, such as XFP, become quite popular in the ROADM network market, it will broaden the network scopes of operators, includes IP/Ethernet CMTs, OLTs FTTH, DSLAMs. As for the 10G SFP+ transceiver module, such as 10G SFP+ 1550nm 80km, it sales reached three times, they are primarily applied into 10G Ethernet and 8G/16G fiber channel. The main reason why development speed of 100G fiber network faster than 40G is that the price of 100G network is lower than 40G, so the much lower LR4 modules will have a great future. Related product: SFP-10G-LR, see at the figure.

Faced with the rapid progress of 40G and 100G optical transceiver modules, Fiberstore also research its brand. Including production and sales of 40G and 100G. Fiberstore has high quality and reasonable price. Our fiber optical transceivers all pass certification. If you have fiber optical transceivers needs, Fiberstore will be your first choice.

How to Achieve Long Distance Transmission by Fiber Optic Transceiver

Recently we met a big project that involved the network channel installation about digital optical transmission equipment, in fact, it is not so complex as the organization network ways, just we can use with SDH and downward access with switches over backbone line, but because of the SDH equipment covers all the site in the progress of construction, so it need to be solved for long distance network connections by another way. Fortunately, we have much experiences in using fiber optic transceiver, this page we will introduce the application of fiber optic transceiver in the network construction progress which combines with this experience.

1. Multimode fiber optic transceiver and multimode fiber optic cables

Fiber optic transceiver is an ethernet transmission device that can exchange the light signal and electrical signal, fiber optic cables that can transfer data over network can be divided into multimode fiber optic cables and single-mode fiber optic cables, fiber core diameter of multimode fiber cable is 50~62.5 μm，and the single-mode fiber cable core diameter is 8.3 μm. In fact, these data are not intuitive for us, we can judge it only by colors, the multimode fiber pigtail‘s color is orange and the single-mode fiber cable is yellow. From the network applications, because of multimode fiber optic cable can transmit for not tool long distance, it just can be used between the buildings, but because of the price is relatively cheap, so there are still some people like to use it.

2. Single-mode fiber optic transceiver series

With the development of technology, this phenomenon that single mode fiber cables applied into the long distance network installation is more and more popular, nowadays many customers use fiber optic transceiver directly, just we call it FTTH (fiber to the home), and these different types of fiber optic transceivers we will introduce to you all based on single mode fiber cables.

Dual Fiber Single Network Port

The dual fiber single network port fiber optic transceiver just use two fibers, a fiber is used to receive and another is used to transmit. A group of fiber optic transceivers can achieve the exchange of electrical signal and light signal. The network device may a switch, also may a server, well, we can see the fiber optic transceiver as PC, which connected with the switch is straight through cable, and with the server is cross cable. With the development of technology, the fiber optic transceiver ports have been generally made adaptive mode (automatic matching cross-line and direct line), it also bring conveniences to the projects.

Single Fiber Single Network Port

With the continuous development of business, we are faced with an unavoidable problem that the shortage of fiber resources. Some companies want to connect the network but there is only a fiber, it is time to use the single mode fiber optic transceiver, it means that receive and transmit signal over a fiber, this product use WDM technology, related product: passive cwdm mux (shown as the figure). The wavelength usually are 1310nm and 1550 nm, and the 1310 nm stands for transmission, and the 1550 nm stands for receiving.

Single Fiber Dual Ethernet Port

With the development of business, some units put forward higher requirements, for example, we organized network for one bank, he asked us to provide two Ethernet lines to separate from. it needs mature and safe fiber optic transceiver device technology, in order to simply the cost of fiber optic devices and achieve the networks over one fiber, we try our best to save the fiber sources. Our solution is that using 10/100 m adaptive port devices, access into the Ethernet link which can reach 60 km, also keep it to support network management functions.

3. Gigabit fiber optic transceivers and integrated optical interface switches

The advantages of using fiber optic transceiver to connect the network, not only stable, but also it has fast speed, 100M full duplex and even 1000M duplex. For example, there is a Engineering machinery manufacturing enterprise, they use the 100M link to network at the beginning, but due to the requirements of the developments of business, we need to provide higher speed to them, fortunately, the progress of the technology provide good products for us, just gigabit fiber cable, from the appearances of fiber cable, it has no differences with 100M fiber transceivers. Yeah, the fiber optic transceiver we used can be directly plugged into the original power supply unit box, which just needs to change the fiber optic transceiver and then upgrade the bandwidth from Fast to Ethernet. Otherwise, we found that the education industry prefer to use an integrated gigabit fiber interface on the switches.

The Solution to SFP Transceiver Module Connections

Recently I met a trouble that when I want interconnect WS c2960 24 TC L + 2 SFP with 1000base LH GLC LH SMD or GLC LH SM to WS C3750G 12S + 12 SFP ports, and I do not know which model of GLC LH SMD or GLC LH SM want to select, and I am going to use single mode fiber optic cable 1310m 9/125. If I need single mode SMD (2 fiber counts) or single fiber. I just want to find out WS C3750G12S + 12 SFP ports that 12 SFP ports are SM or SMD use LC connector. The solution to SFP transceiver module connections will be provided in this article.

In fact, I received several answers, someone says, the price between the 2 usually the same but GLC LH SMD SFP transceiver module supports additional option of DOM (digital optical monitoring). So he uses GLC LH SMD, as for which fiber cable, just use the single fiber cable, but I think so I use SMD how can I use single fiber cable, this is one way direction and i think i should use single mode duplex (2 fiber count). And can connect single mode duplex (2 fiber count) fiber cable to WS C3750G 12S.

Then someone from Fiberstore answered me that both the GLC LH SM and GLC LH SMD SFP transceiver module supports the IEEE 802.3 1000Base LX/LH standard and be good for compatible with each other. The difference between the two is the case that the GLC-LH-SMD transceiver has additional support for Digital Optical Monitoring capability. As for the second question, 1000base fx sfp, 1000base sx sfp, 1000base lx lh sfp, 1000base zx sfp, 1000base bx10 sfp, DWDM and CWDM SFP transceiver module: LC fiber connectors (single-mode or multimode fiber); 10GBASE-SR, LR, LRM, CX1 (v02 or higher) SFP+ Transceivers: LC fiber connectors (single-mode or multimode fiber).

Then if you have such similar problems, hope it can help you, and there I have a small tips for us, if you want to know where to get sfp transceiver and reach these effects, Fiberstore is a good place to get them, I found it do a professional site, and the price also reasonable, It is worth mentioning that Fiberstore is doing a big sales.

What Technology Should be Valued at the Next Generation Data Center Network

With the continual?expansion of business data center, the most several difficult problems for them are mainly about divided network environments, simple says, separate data network, separate storage network, separate calculation?network, protocols and there are different disadvantages of standards. Different networks need different cards, space, power and cooling infrastructures for their business. Interspersed interlaced network cabling may make many administrators feel dizzy. Aimed at different network environments, the company needs a professional technical team to support, manage, maintenance, these problems all block the forward developments of data center, let alone meet the future of cloud computing.?The figure shows?modern data center.

You may ask, what qualities we are taken for the next generation data center networks? Now we can see the characteristics, such as simplicity, virtualization features, can accommodate the expansion of the size of the data center, support higher bandwidth, low latency, non-blocking and so on. But as for these features, mainstream network equipment vendors aimed the advantages of their products and solutions to this goal, so if there is an architecture able to support these features do? The answer is yes, unified architecture (Unified Fabric), regardless of Cisco UCS. Brocade VCS, juniper3-2-1 plan, H3C’s unified fabric, also exist Unified Fabric. This page we just say two points.

The key technology under Unified Architecture (Unified Fabric)

Gigabit Ethernet

With the reduction of gigabyte networks at the server connections, Gigabit Ethernet share is rising, which maily due to the growth in the enterprise data center network traffic.In fact, with the 40G / 100G standard developments, it is sure that Gigabit Ethernet replacing the gigabyte networks, the birth of the Gigabit sfp+ transceiver?standard which has low power, sfp+ direct attach cable?can be achieved in the case of low-cost Gigabit Ethernet. And just mainstream might not be enough, the following what I will be introduced to toward greater success.

FCoE protocol (Fiber Channel over Ethernet)

FCoE is one of the most shining technology data center network currently, any vendors have to talk about the technology of the developments of their products. FCoE refers to the Fiber Channel over Ethernet, it can insert fiber channel information into the Ethernet packet, so that the Fiber Channel storage devices -SAN server requests and data can be transmitted over an Ethernet connection, without the need for a dedicated Fiber Channel fabric . Its main benefits: First, make storage traffic and network traffic share the same Ethernet cable and a fusion of the card, simplifying management and reducing energy consumption. Second, provide the same performance with optics. The third is the ability to integrate effectively existing SAN.

Finally, you know, now i work for Fiberstore and in our website, we can provide the most advanced technology and the most effective way to help you solve the fiber optics problems, and at the same time, we also provide all the fiber optic products, such as 10 100 1000base t ethernet sfp, qsfp 4x10g aoc7m and glc fe 100lx rgd to buy. If you are interested, take a decision for it.

Choose and Get SFP+ Module and Cables Effectively

According the standard of the IEEE 802.3 ae committee ratified the 10 Gigabit Ethernet and with the general specification, it defines a number of fiber optic interfaces. These standard interfaces attempted to satisfy a number of different objectives including support for MMF and SMF compatibility. They include SFP+ sr transceiver, sfp+ lr transceiver, SFP+ er transceiver, SFP+ zr transceiver, Copper CU SFP+, maybe some one do not know the last one, related product you can see: cisco sfp h10gb cu2m. Their applications are using 10 Gigabit Ethernet and 2x/4x/8x/16x Fiber channel, for example, the cisco SFP+ module, the optical interoperability with 10Gbase XENPAK, 10 GBase X2, and 10GBase XFP interfaces on the same link; the device can olug into an Ethernet SFP+ port of a Cisco switch, just do not need to power down if installing or replacing, these are all its adavantages. the Cisco quality ID feature enables a Cisco platform to identify whether the module is certified and tested by Cisco. Then many people also think this problem that when we use the cisco transceiver with cisco switches or even patch cables, do they need the vendor ti phydiacally hang the access points and do they need eo configure the access points and how many buildings will the access points be installed into, well, the next paragraph will give you the answer.The vendor needs to phydically hang the access points and the points are controller based and they will need to be configured. All access points are to be installed on the ceilinf, the only exception would be in gym where it would to be mounted to the ceiling beam. The Figure show that push the SFP Front of the module to make it into the slot.

Many people know that SFP, SFP+ and they are not familiar with 40G QSFP, then i will introduce one kind of QSFP transceiver to you. The 40 Gb/s QSFP+ transceiver. It is a kind of fiber optical modules with four independant optical transmit and receiver channels, it combines the higher density attractions of modules with some the key advantages normally associated with SFP+ modules. And another product you also can not forget, sfp+ direct attach cable. In Fiberstore, there is a similar attach cable, sfp+ direct attached twinax copper,it is suitable for very short distances and offer a usful way to connect within racks and across adjacent racks. Cisco offers passive twinax cables in lengths of 1, 1.5, 2, 2.5, 3 and 5 meters, and active twinax cables in lengths of 7 and 10 meters. related product: 0.5 m sfp+ cable.

And Fiberstore’s product are fully compliant with different brands, such as Cisco, hp, huawei, Finisar… and standards like Ethernet, Fibre Channel, Infianiband, SONET/SDH/OTN and PON standards, 1g sfp and 10g SFP+ and other transceivers that not mentioned such as WDM module, Bidi module all can get from Fiberstore. We have real wide variety of fiber optic transceivers, I do believe that it is a quite great choice for you.