Several days ago I observed some comments by my reader, many individuals mentioned that my blog is too difficult to understand. Well, today’s blog article would use simple words and comic picture to tell you some about Fibre optic patch panel. In a simple word, a patch panel works like a telephone switchboard, but for cables so as to achieve better cable management. But how to connect fiber optic cables or other devices to patch panels?
How TO Connect Fiber Optic Cables to Patch Panels?
1. A cable leading from each network device is wired into the back of the patch panel. Network devices can include network switch, wall jacks, computers, hubs and so on.
2. Short patch cables at the front of the patch panel control how devices are connected. The patch cables at the front of the patch panel connect the devices to switches or other patch panels.
3. To change the connection, simply change which socket the patch cable goes into.
If you are using a patch panel (such as Leviton 24 port patch panel), this means it’s easier to alter the bond in between products. Just about all you must do is actually alter that outlet the actual area solar panel provides you with a simpler user interface with regard to controlling cable connections.
Let’s look in more details at what goes on behind the patch panel.
Should you change the actual area solar panel more than, you will see the strike lower prevent. A person strikes person cables to the prevent utilizing an effect strike device.
How a person set up the actual cables is essential. The actual cables adhere to a particular colour design, as well as you have to adhere to this particular to be able to help to make cable connections in between products. The actual design depends upon the actual kinds of prevent you are utilizing as well as the kind of cable you are pounding to the prevent.
Each cable or set of wires corresponds to some outlet about the entrance from the fiber panel. Should you content label every outlet using what it is attached to, you can inform instantly exactly what all of your own system products tend to be attached to, as well as it will likewise end up being easier to alter the actual cable connections.
The overall type with regard to marking the actual sockets in your fiber panel (as Black Box Patch Panel )is by using the area quantity then the actual coat or even setting quantity.
Now I work for FS.COM, maybe some have already known it if you watched my article, as usual, if there are some related products needed, welcome to have a visit, there is good news that FS SFP transceivers or patch panels and CWDM/DWDM MUX/DEMUX are in the lowest price of the history of Fiberstore. Do a nice chance and take actions for it.