Order Fiber Optic Patch Cable from FiberStore

FiberStore Inc. is a telecommunications based national stocking distributor of fiber optic cables, we provide singlemode and multimode fiber optic cables & patch cables ranging from 2 fiber to 264 576 to 744 up to 864 for FTTX applications. Fiber optic cable refers to the complete assembly of fibers, strength members and jacket. Fiber optic cables come in lots of different types, depending on the number of fibers and how and where it will be installed. Choosing cable carefully is necessary as the choice will affect how easy it is to be installed, spliced or terminated and, most important, what it will cost! FiberStore offer complimentary engineering at no cost for simple questions regarding optical fiber patch cable.

Fiber patch cable is a cable terminated with optic connectors on both ends. It has two major application areas which is for computer work station to outlet and fiber optic patch panels or optical cross connect distribution center.

FiberStore Fiber optic cable products offers a huge selection of common and armored fiber patch cable. Armored fiber optic patch cables are with same types of fiber optic connectors as the commonly used types, the different is the cable itself. Armored fiber optic cables are with stainless steel tape just inside the cable jacket that a common type fiber optic patch cable can give. Amored fiber optic cords are anti-rodent, and it can be handled as electric cables, it is not easy to get damaged or cut, and it can resist an adult step on it.

All of our fiber optic patch cords are manufactured strictly according to international standard. We adopt high quality raw materials and we use on-site manufacturing equipment. Our skilled workers and quality control department work closely together to guarantee that every piece of our fiber optic patch cord is excellent quality and looking.

Ordering information for our fiber optic patch cord:
Fiber connector 1: LC, FC, SC, ST, MTRJ, DIN, D4, E2000, MPO
Fiber connector 2: LC, FC, SC, ST, MTRJ, DIN, D4, E2000, MPO
Ferrule Interface type: PC, UPC, and APC
Fiber cores: Simplex, duplex
Fiber type; Single mode (G. 652, G655), multimode (50/125)/ (62.5/125), OM3 cable
Fiber diameter (mm): Φ 0.9, φ 2.0, Φ 3.0
Fiber length; User-defined

Applications of fiber optic patch cords:
FTTH application
Premise installations
Data processing networks
Wide Area Networks (WANs)
Telecommunication networks
Industrial, mechanical and military

We have almost all of the fiber optic cable and cable assemblies products. Our warehouse is located on both China and USA allow for fast and reliable shipping of fiber optic cables throughout the USA and we also export all over the world. All of our fiber optic cables are made for immediate or for special orders – the fastest, turnaround in the industry. We have custom fiber jumper cables and fiber assemblies at the USA’s best price as well. Call us today at +1 (206) 227 9282

Fiber Optic Pigtails

Cable types include copper and fiber. Copper cable is a group of insulated conductors enclosed within a common jacket while fiber optic cable refers to one or more optical fibers enclosed within a protective covering and material to provide strength. Cable assembly is a cable that has connectors installed on one or both ends. If connectors are attached to only one end of the cable, it is a pigtail. If its connectors are attached to both ends, it is known as a fiber jumper & fiber patch cable. General use of these cable assemblies includes the interconnection of multimode and single-mode fiber optic cable systems and optical electronic equipment.

FS is the professional supplier of fiber pigtails SC, SC/APC, ST, ST/APC, FC, FC/APC, LC, LC/APC, MT-RJ, MPO, MTP, E2000, E2000/APC, bunch/ribbon/bundle fan out fiber optic pigtails. Fiber optic pigtail is used to splice outside plant cable to the backside of a fiber optic patch panel.

Generally speaking, pigtail fiber optic cable is a fiber end with a connector factory-attached for future splicing into a system. It starts as a manufactured patch cord or jumper with a connector at each end. Then you can cut the jumper in half and have two pigtails ready to splice. Pigtails are available with a variety of connectors, depending on your needs. These products have advantages over field terminations because the connectors are factory-installed and polished to exacting standards. By this way to save time over attaching a connector to the end of an optical fiber, and it typically produces a better connection. They are especially useful in situations where many connectors have to be added to cables in a relatively short time, or in a location where is easier to make a splice than it is to add a connector. On the downside, fiber pigtails require hardware to protect the splice and investment in a fusion or mechanical splicer, in addition to the cost of the connector and hardware itself.

Common connector type of fiber pigtails is SC, LC, FC, ST, MU, MTRJ, etc. ST pigtail connector is with metal outer body and with a long spring located ferrule hold the optical fiber. ST cable can be 9/125 single mode or 50/125 multimode or 62.5/125 multimode. ST fiber pigtails connector ferrule interface can be PC, UPC or APC.

Besides, FS supply various kinds of fan out pigtails, include ribbon, bunch, bundle fan out fiber pigtails. Fanout fiber pigtail is designed for easy connectorization. The break out cables can be 3mm outer diameter or 0.9mm outer diameter, the break out part of the pigtail can be with break out kits or with heat shrinkable tubes, and the cable length can be customized to fit for your special needs.

FS also offer the armored and waterproof fiber optic pigtail, they are produced strictly according to IEC standards, the products feature low insertion loss, high return loss, good interchangeability and repeat push-pull performance, which make them easy to use.