Deploy Network in A New House

Network has changed our lifestyle and it has become an important part of our daily life. Therefore, home network deployment is a very common project. When it comes to the components required for the network deployment, many people would say Ethernet cable and router, without hesitation. However, when you start the project, you will find it is not that simple. To deploy network in a new house, future-proof cabling and cost-effective components are two essential elements. And this article will share some tips with you based on these two elements.

home network deployment

Run Conduit

We know that conduit can protect cable from damage, in addition, it will allow you to pull new wiring in the future. No matter what wires you require in the future, you can easily replace them. Remember to run more conduit than you think you need. Run conduit to every room. Typically, run it to whichever wall you’re thinking of placing your equipment. Also, run it to locations in hallways and on floors where you may place future routers/access points for wireless networking. You will find that Power over Ethernet is useful for this.

Cat6 Cable Is Fine

For Ethernet cable, Cat6 cable is fine for all current standards unless you have a giant mansion. Cat6 cable is a standardized twisted pair cable for Ethernet and it is backward compatible with the Cat3, Cat5 and Cat5e cable standards. In addition, Cat6 cable provides performance of up to 250 MHz and is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T/1000BASE-TX (Gigabit Ethernet), and 10GBASE-T (10-Gigabit Ethernet). For transmission distance, Cat6 cable can reach 100 meters for slower network speeds (up to 1,000 Mbps) and higher network speeds over short transmission distance—it can achieve only 55 meters at the speed of 10 Gbps and 33 meters in high crosstalk conditions. You only need Cat6a cable if you plan to run cable at 10 Gbps and longer than 55 meters (180 ft). Also, remember to have “extra” cables which will save you enormous hassle and expense.

Dual Band Router Will Be Better

We know that wireless network utilizes either 2.4 GHz frequency band or 5 GHz frequency band. The 2.4 GHz wireless network covers a larger range than 5 GHz wireless network, but 5 GHz band can provides faster speed. In wireless home network, many older Wi-Fi devices do not support 5 GHz band. It is not difficult to find that 2.4 GHz and 5 GHz have their own advantages. As a result, dual band router will be better for your home network deployment.

Utilize PoE

If you want to set up multiple access points and IP cameras, PoE technology is a good option which can realize the power and data transmission over the same Ethernet cable at the same time. PoE devices utilize the original PoE standard, IEEE 802.3af, which provides up to 15.4W of DC power to each device. In addition to wireless access point and IP camera, there are some other PoE devices on the market, such as IP phone and PoE switch.

PoE technology

Conclusion

In fact, once you have decided to deploy network in your new house, there will be a lot of things that you have to think about, such as which type conduit to run, how long cable to buy, where to place the router, how many access points to set up, which kind PoE switch to buy, and so on. But there is another important thing that you must pay attention to, that’s where to buy what you need. FS.COM can provide you high quality products at low price, such as 305 meters (1000 ft) is US$ 120.00, 8 port PoE switch is US$ 159.00. For more details, you can visit our site.

All About Cat7

Network has become an indispensable part of our daily life. Many homes and businesses today deploy network with either a wired network connection or a wireless connection, and these two network connection methods have their own advantages: wired connection is typically faster than wireless connection and has lower latency; while wireless connection makes it easier to get access to the network from nearly any convenient location. As network technology has kept stepping forward, these two types of network hardware also continue to advance, satisfying the requirements of users. Take wired connection for example, now a newer cable category is Cat7 ethernet cable. This article will focus on Cat7 and share the advantages and disadvantages of Cat7 cabling.

Overview of Cat7

Cat7 ethernet cable is not currently recognized by TIA/EIA, but it is designed to support 10G Ethernet with distance up to 100 meters. It can offer transmission frequencies of up to 600 MHz, which is 6 times larger than Cat5e and 2.4 times larger than Cat6. The Cat7 ethernet cable contains four twisted copper wire pairs, just like the earlier standards, and shielding has been added for individual wire pairs and the cable as a whole. In addition, Cat7 ethernet cable is terminated with GG45 (GigaGate45) connector, which is still compatible cat5e cable and cat6 cable with RJ45 connector.

Cat7 ethernet cable

Advantages And Disadvantages of Cat7 Cabling

Though Cat7 ethernet cable is a newer cable category, it is not the best choice for all network deployment. Why? Keeping reading and you will find the answer in the following part.

Advantages
  • Cat7 has higher bandwidth of up to 600 MHz, which is 6 times larger than Cat5e (100 MHz) and 2.4 times larger than Cat6 (250 MHz).
  • Cat 7 has an overall shield as well as individual shielding of every pair. It performs better to protect against outside interference. Therefore, it is suitable for installing in strong RFI & EMI environment.
  • Cat7 is thicker, more bulky, and more difficult to bend.
  • Cat7 is regarded as the most durable cable and has a longer lifespan of fifteen years than cat5e cable and cat6 cable.
  • Cat7 is compatible with preceding Ethernet cable standards like Cat5e and Cat6. as a result, users can move Cat5e cable or Cat6 cable from existing copper based LAN and install Cat7 without having to change the existing electronics.
Disadvantages
  • Cat7 ethernet cable is not currently recognized by TIA/EIA. It is not a solid, established industry standard.
  • Cat7 is very heavy. Individual pair and overall shielding increases the overall weight and size of Cat7, which makes it not an job for Cat7 cabling. Larger & stronger pathway and more stringent bend radius (100 mm or 4 inch) are required.
  • Cat7 is more expensive. Individual pair and overall shielding also means higher labor costs and more work towards cable termination.
  • Cat7 cabling may cause ground loop problems. If both ends of the cable are connected to ground, it will lead to ground loops which are a major cause of noise, hum, and interference in audio, video, and computer systems. They can also create an electric shock hazard, since ostensibly “grounded” parts of the equipment, which are often accessible to users, are not at ground potential.
Conclusion

For home network deployment, it is not a great option, because it is more expensive and Cat7 cabling is complicated. However, Cat7 is suitable for the place where needs high speed data transmission and is high EMI environment. Therefore, in order to get a successful network deployment, you have to make a careful plan, be familiar with environment, confirm the requirement of network deployment and choose the right transmission media. FS.COM offers the best and most versatile copper cables including Cat5e, Cat6 and Cat7 products. For more details, please visit our site.